australia:caprasports2p
Table of Contents
Capra Sports 2P hiking tent
see also:
- I don't sell any of these nor do I receive any remuneration if you buy them, and I have not personally reviewed all of them, they are listed here to give you perspective
- any prices are indicative and are subject to change by the retailers
Introduction
- cheap, Chinese, basic ultralight freestanding 1-2P hiking tent which is a similar design to the Luxe NX3 but lighter materials and a 1/3rd of the price
- seems a reasonable budget option for fair weather overnight hikes that do not involve risk of severe storms or winds
- I would use a foam mat under the tent to protect the floor but also to reduce internal floor condensation under your sleeping pad
Specs
- ~8mm alloy single pole duel hub design with attached crossbar - you can't go wrong setting it up!
- 2.1×1.35x1m;
- my inner tent floor measured 2m x 1.3m x 1m high and door entry is ~90cm wide by 70cm high
- 3000mmPU 15D ripstop silnylon bright green fly;
- inner is bottom 1/3rd white silnylon ripstop fabric and a central ceiling part fabric, rest is B3 black mesh;
- 3000mmPU 20D ripstop silnylon floor;
- inner clips on to the aluminium poles - very easy to set up and pack up;
- all seams are seam sealed with tape
- comes with 4 reflective guy ropes and 10 good aluminium triangular-style pegs, although for full pegging out you need two more
- 1.8kg;
- Temu Oct 2024 $AU132
Pitching options
Fly first
- this is the harder option but great if it is raining as the inner can be protected and you spend less time in the rain
- assemble the poles (ensure you don't flick a pole end into someone's eye!)
- place the fly over the poles and attach each corner eyelet of the fly to the corner poles and also the eyelets to the crossbar ends
- optionally, for extra support, tie the 7 internal ties of the fly to the poles
- peg the corners out
- now you can sit under it and clip on the inner to the poles and attach the eyelets of the inner to the 4 corner poles plus the two crossbar ends
- now readjust the corner pegs so that it is pitched taut but not over tight and then zip up the fly doors and peg them out as well as the two ends of the fly so that the fly stays separated as much as possible from the inner.
- attach the 4 guy ropes to the fly corner guy out loops and peg these out
- finally, ensure the vent struts are in place so you get adequate ventilation to reduce condensation from your breathing
Inner first
- as for the fly first option but you attach the inner to the poles first, THEN you attach the fly
- fly can be left off for hot nights with no rain or dew and you get to see the stars
My Initial Review
Pros
- fast and easy set up
- lightweight and fairy compact
- great versatility - can be set up fly first, fly only, inner first, inner only
- at 1.8kg, it is a reasonably spacious, light, 1-2P hiking tent
- on paper, it seems to be adequately water proof and in my testing overnight in showers, it remained dry inside
- comes with a detachable mesh loft and two ground level mesh pockets
- two reasonable sized doorways although would be nicer if they were larger
- most of the upper part is a black mesh which makes sky viewing at night more pleasant when fly is removed although there is a large central fabric ceiling area to obstruct views
- large area of mesh and the two doorways and two vents should give plenty of ventilation options, although in hot humid wet weather, I would probably suspend a tarp above it for more protected ventilation in the rain
- 4 hanging plastic loops on ceiling which are also used to suspend the ceiling loft
- quality control seems reasonable in the version I received via Temu
Cons
- as with most ultralight tents, the thin fabric needs to be treated with extra care
- the zips seem to be budget quality, so will need to be treated gently
- the is no peg out for the inner tent doorway so you will need to use two hands to open the zips of the inner tent doors
- the vestibules are not very deep at only 60cm instead of the more common 75cm but are adequate
- the entrance and exit is a bit tight and if the fly is wet you will probably splash water into the tent when getting in
- there are no additional peg out points for the vestibules - these would have been nice - to help with pitch of the vestibules on uneven ground
- the protection of the ends of the crossbars for the fly seems minimalistic and may end up being a failure point
- lots of fiddly internal ties to attach fly to the poles - I presume this is to ensure stability and reduced stress on the light fabric in the wind, so I presume it is wise to do these but they do add time in set up and pack up
australia/caprasports2p.txt · Last modified: 2024/10/20 12:48 by gary1